banner image

FP30 Folded Plank Rainscreen Facades System

FP30 Folded Plank Rainscreen Facades System

The Spanwall FP30 folded plank system is a pressed formed 3mm aluminium interlocking panel which is 30mm deep. Spanwall FP30 is secretly fixed onto a traditional aluminium helping hand system. FP30 can be installed horizontally, vertically, or diagonally.

Unlike Spanwall RF50-FR and SF40-FR ventilated systems, FP30 is not ventilated at the longitudinal joint, ventilation should be provided at the base and top of the vertical wall.

The interlocking horizontal joint can be supplied as a hairline or up to 30mm. FP30 is offered in modules of 150mm to a class leading 600mm, custom options are available on request. FP30 is offered in continuous lengths up to 4000mm.

Testing & Certification

FP30 is independently tested and is designated A2-s1,d0 to EN13501-1 (when PPC is applied to the aluminium substrate, A1 if Anodised.) FP30 has passed the Standard for systemised building envelope testing by CWCT.

Independent test certificates and standard CAD drawings are available in Downloads via the Products tab. 

Spanwall offers a full range of products and solutions to complement the F30, these include, secondary support system, flashings, custom fabrications, inhouse stud welding, routing, perforating and fixings/screws.


  • Certified to meet CWCT rigorous specification for rainscreen cladding.
  • Full range of EN13501-1 A1 and A2 – s1,d0 panel options (PPC, Anodised & Pre-coat).
  • Substrate material carries CE Marking.
  • Flat panel surface.
  • Bespoke panel sizes on request.
  • Horizontal, Vertical or Diagonal orientations.
  • Fully mechanically fixed system.
  • Hidden fixings.
  • Options of Hairline horizontal gap.
  • Lightweight, flexible system.
  • Low Maintenance solution.


  • Aluminium
  • Copper
  • COR-TEN®
  • Stainless Steel
  • Zinc
  • Bronze
  • Galvanised Steel


  • 3mm folded Aluminium as standard, (options Zinc, Copper, COR-TEN™ or Wood Effect).
  • 30mm Cassette depth as standard.
  • All fixings used in the systems are stainless steel.
  • Cladding zones range from 110mm – 390mm.
  • NBS specifications available tailored to your project.
  • Bottom-up installation.
  • Fast installation.
  • Approved Installers.
  • Warranty <25-years.


  • Polyester Powder Coated (PPC).
  • PPC Stone Effect.
  • Anodised Aluminium.
  • Pre-Coated Coil (PVDF).
  • Vitreous Enamel.
  • Wood Effect.